Speakers

PSS5 Ceiling Speaker

100 mm ceiling mount speaker, 5 Watt, supervised 100 Vrms line, white

PSS5-LP Ceiling Speaker

100 mm low profile ceiling mount speaker, 5 Watt, supervised 100 Vrms line, white

PSS5-BK Ceiling Speaker

100 mm ceiling mount speaker, 5 Watt, supervised 100 Vrms line, black

PSS5-LPSME Surface Mount Enclosure

PSS5-LPSME Surface Mount Enclosure

PSS3 Ceiling Speaker

88 mm ceiling mount speaker, 3 Watt, supervised 100 Vrms line, white

PSS3-LP Ceiling Speaker

88 mm low profile ceiling mount speaker, 3 Watt, supervised 100 Vrms line, white

PSS3-LP-BK Ceiling Speaker

88 mm low profile ceiling mount speaker, 3 Watt, supervised 100 Vrms line, black

PSS3-LP Surface Mount Enclosure

PSS3-LP Surface Mount Enclosure available in White and Black

PSS1 Sounder Speaker

100 Volt Line Speaker 1.1W

PSSHORN Speaker

100V 3W Horn Speaker

BCS-HS10E Speaker

10 watt IP66 weatherproof horn speaker, supervised 100 Vrms line

C2048 Speaker

10 watt IP 66 marine-grade weatherproof horn speaker, supervised 100 Vrms line

MPH-5300 Speaker

Horn Speaker 30 Watt weatherproof IP66 100 Volt line

PSSB501 Speaker

Pertronic Speaker with B501 Analogue Addressable Base

PSTIF Strobe Interface

An interface for driving L-Series, SpectrAlert Advance, or SpectrAlert strobes from Pertronic 100 Volt-Line circuits

PSSB401 Speaker

Pertronic Speaker with B401 Conventional Base

PSSB524IEFT Speaker

Pertronic Speaker with B524IEFT Isolator Base

PLPSSBMR Ring

Surface mount ring for speaker base, 125 mm diameter x 20 mm high. Suitable for Pertronic PSSB401 and PSSB501 speakers

EXTSPKRHOUS Speaker Housing

Vandal-resistant enclosure for horn speakers. Power-coated zintec.

IMPEDMETER-MK2 Impedance Meter

Hand-held automatic audio impedance meter w. speaker load (wattage) display for 100 volt lines incl. fire & evacuation systems. Rechargeable

Sounders

PS2 Sounder

Pertronic Apartment Sounder

PS1 Sounder

Pertronic Sounder

PS1400 Sounder

Pertronic Sounder PA400 Tone

PLS Lamp Sounder

Pertronic Lamp Sounder

PSBAS2220 Sounder Base

Analogue addressable detector base with built-in sounder

CWSO-RR Sounder

Conventional audible alarm device. Configurable alarm signal, with a choice of 32 recognised signals. Suits 12 volt and 24 volt systems.

PS189 Gasket

Seal for use with deep CWR or CWW base for IP65 protection rating.

SSM Bell

Motor-driven bell suitable for the supervised Bell circuits on Pertronic fire panels, and other signaling applications

ZMB24V Monitor Board

Optional board for Pertronic fire alarm control panels. Allows independent activation of one or more bell circuits

VADs & Strobes

DVAD Dual Strobe

It's designed to provide indoor visual indication for emergency evacuation systems. Available for Wall-Mount and Ceiling-Mount.

SRL Strobe

L-Series wall-mount conventional strobe with seven field-configurable brightness settings. Red body, white flash

SCRL Strobe

L-Series ceiling-mount conventional strobe with seven field-configurable brightness settings. Red body, white flash

SCWL Strobe

L-Series ceiling-mount conventional strobe with seven field-configurable brightness settings. White body, white flash

LX-W-VAD Strobe

Visual alarm device (strobe) for wall mounting. Red or white flash. EN54-23 compliant.

LX-C-VAD Strobe

Visual alarm device (strobe) for ceiling mounting. Red or white flash. EN54-23 compliant.

SYS-STR-FIRE Strobe

Visual alarm device (VAD) with red lens and field selectable brightness settings: 3, 16, or 25 candela

ZMB24V Monitor Board

Optional board for Pertronic fire alarm control panels. Allows independent activation of one or more bell circuits

SRK Strobe

Weatherproof visual alarm device with field adjustable brightness settings. Red body, white flash. IP56 rating

WST Strobe

Addressable wall-mount plug-in strobes

Strobe Lens

Coloured lenses for L-Series and SpectrAlert Advance strobes

PL1-W LED Alarm

Pertronic LED Alarm

SBB Mounting Box

Surface-mounting back boxes for L Series alarm (alerting) devices. Available in wall-mount and ceiling-mount variants.

PSTIF Strobe Interface

An interface for driving L-Series, SpectrAlert Advance, or SpectrAlert strobes from Pertronic 100 Volt-Line circuits

Sounder + Strobes

P4RL Sounder Strobe

L-Series wall-mount 4-wire conventional sounder + strobe with configurable tones, volume, and brightness. Red body, white flash

P2WL-P Sounder Strobe

L-Series wall-mount 2-wire conventional sounder + strobe with configurable tones, volume, and brightness settings. White body, white flash

P2RL Sounder Strobe

L Series wall-mount 2-wire conventional sounder + strobe with configurable tones, volume, and brightness settings. Red body, white flash

ZMB24V Monitor Board

Optional board for Pertronic fire alarm control panels. Allows independent activation of one or more bell circuits

PSTIF Strobe Interface

An interface for driving L-Series, SpectrAlert Advance, or SpectrAlert strobes from Pertronic 100 Volt-Line circuits

Amplifiers

EA120 Amplifier

Amplifier for supervised 100 V rms line evacuation systems, 120 watt audio output, 24 volt dc power supply

EA60 Amplifier

Amplifier for supervised 100 V rms line evacuation systems, 60 watt rms audio output, 24 volt dc power supply

EABC Blocking Capacitor

Blocks the audio channel DC monitoring voltage to prevent erroneous monitoring faults from occurring when a common microphone is used.

EAMIC Microphone

Fist microphone with PTT switch for emergency alerting and public address applications. Compatible only with Pertronic EA series amplifiers.

EA Speech Message Tool

Online Text to Speech tool for creating pre-recorded custom speech messages for Pertronic EA series amplifiers

EVAC50W24V Amplifier

Amplifier for supervised 100 V rms line evacuation systems, 50 watt rms audio output, 24 volt dc power supply

EVAC20W24V Amplifier

Amplifier for supervised 100 V rms line evacuation systems, 20 watt rms audio output, 24 volt dc power supply

EVAC20W12V Amplifier

Amplifier for supervised 100 V rms line evacuation systems, 20 watt rms audio output, 12 volt dc power supply

EVAC50PREA Pre-Amp

Pre-Amp (Mic I/P) for EVAC50W24V Amplifier

EVACGEN EVAC Tone Generator

EVAC Tone Generator Module

EVAC250W24V Amplifier

Amplifier for supervised 100 V rms line evacuation systems, 250 watt rms audio output, 24 volt dc power supply

EVAC120W24V Amplifier

Amplifier for supervised 100 V rms line evacuation systems, 120 watt rms audio output, 24 volt dc power supply

ADM-4 Audio Distribution Module

4-way audio distribution module with one 100 volt line input and four independently supervised 100 V rms audio output channels

ADM-2 Audio Distribution Module

2-way audio distribution module with one 100 volt line input and two independently supervised 100 V rms audio output channels

PREAMP Pre-amplifier

External Microphone Signal Boost Pre-Amp

PSTIF Strobe Interface

An interface for driving L-Series, SpectrAlert Advance, or SpectrAlert strobes from Pertronic 100 Volt-Line circuits

A1720 Tone Generator

A1720 MP3 Tone Generator & Message Player

EVACHMIC Microphone

EWIS Hand Microphone

EVACDMIC Desk Microphone

Desk Microphone

WIP Phone

The Fire Phone Intercom is designed specifically for use as a warden intercom point (WIP) in emergency warning systems (EWS).

IMPEDMETER-MK2 Impedance Meter

Hand-held automatic audio impedance meter w. speaker load (wattage) display for 100 volt lines incl. fire & evacuation systems. Rechargeable

Microphone pre-amplifier

Microphone pre-amplifier for interfacing a remote microphone to the Pertronic 50 Watt 24 Volt evacuation amplifier EVAC50W24V

BCEWAPT Blocking Capacitor

Blocking Capacitor Unit for use when connecting analogue addressable modules such as the Apartment Module or M500S to an EWIS 100V-Line

AV Signs

AVS Weatherproof with Sounder

Audio Visual Sign, Weatherproof Version, with Sounder (Requires Separate Fascia)

Audio Visual Sign

Audio Visual Sign

Weatherproof Visual Warning Sign

Weatherproof Visual Warning Sign

AVSCM Countdown Module

Countdown Timer Module for Audio Visual Sign

Explosive Atmosphere

BEXL15DFV100AB1A1R Speaker

100V-Line 15 Watt horn speaker with series blocking capacitor for use in areas subject to explosive atmosphere

A105N-IS Sounder

105 dB(A) Alarm Sounder (Indent product)

ISMTL5523 Solenoid Driver

Solenoid / alarm driver with galvanic isolator and line fault detection, for use in areas subject to explosive atmosphere

ISMTL5526 Relay

Two-channel switch-operated relay with intrinsically-safe outputs

Mass Notification System

MNS

Mass Notification System

Wireless

Remote Vibrating Alarm System

Wireless system for deaf and hearing-impaired occupants. Controls up to 8 receivers, each with vibrating bed shaker and output for strobe