ASPIRATING SMOKE DETECTION
 |
VESDA LaserSCANNER, VLS-200 Series | ||
| The LaserSCANNER is similar to the standardLaserPLUS detector, but also includes a valve mechanism in the inlet manifold and software to control the airflow from the four VESDA sectors (pipes). This configuration enables a single VESDA zone to be divided into four separate sectors, for example, distinguishing between separate voids within a room. | |||
| (view datasheet) | (view installation note) | (pdf) | |
|
VESDA LaserPLUS, VLP-000 Series | ||
| The LaserPLUS detector is the central element of the VESDA smoke detection product range.Using unique detection principles, the LaserPLUS has a sensitivity range of 0.005 - 20% obscuration/m (0.0015 - 6% obscuration/ft). The LaserPLUS detects fire at the earliest possible stage and reliably measures very low to extremely high concentrations of smoke. | |||
| (view datasheet) | (view installation note) | (pdf) | |
 |
VESDA LaserCOMPACT, VLC-500 (Relay only), VLC-505 (Network) | ||
| The LaserCOMPACT detector has been specifically designed to provide all the benfits of aspirating smoke detection, including very early warning, in single enviroments small areas and where space is a premimun. This has been acheived through the combination of approved LaserPLUS detection techology, dual stage air filtration technology and a modified aspirator design incorporated into a smaller enclosure. | |||
| (view datasheet) | (view installation note) | (pdf) | |
 |
VESDA LaserFOCUS, VLF-500 | ||
| The LaserFOCUS detector is a very early warning smoke detector designed to protect small, business-critical environments of less than 500 m2 (5000 sq. ft.). The detector works by continually drawing air into sample holes in a pipe network. The air is filtered and passed into a detection chamber where light scattering technology detects the presence of very small amounts of smoke. | |||
| (view datasheet) | (view installation note) | (pdf) | |
|
VESDA LaserFOCUS, VLF-250 | ||
| The LaserFOCUS detector is a very early warning smoke detector designed to protect small, business-critical environments of less than 250 m2 (2500 sq. ft.). The detector works by continually drawing air into sample holes in a pipe network. The air is filtered and passed into a detection chamber where light scattering technology detects the presence of very small amounts of smoke. | |||
| (view datasheet) | (view installation note) | (pdf) | |
 |
VLF Network Interface Card , VIC-010 | |
| The VESDAnet Interface Card (VN Card) is a simple to install plug-in interface card for the range of VESDA LaserFOCUS VLF-250 and VLF-500 smoke detectors. The VN card provides seamless VESDAnet communication from the detector to VESDAnet devices and configuration and monitoring tools. | ||
| (view datasheet) | (pdf) | |
 |
VESDA Display Modules, VLS, VLP, VLC | |
| Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators. They also have 4 push button keys to control the detector and the mode of the display. | ||
| (view datasheet) | (pdf) | |
 |
VESDA Inline Filter, VSP 850G | |
| The VESDA In-Line Filter is designed to ideally complement VESDA ASD systems to protect a wide range of environments with high levels of airborne contaminants in a simple and cost-effective manner. | ||
| (view datasheet) | (pdf) | |
