MIMICS / REPEATERS
 |
F120AM-3 | ||
| Pertronic Industries' F120A LCD Mimic allows F120A Fire Alarm messages to be displayed remotely. Up to16 addressable mimics may be connected to the F120A, which can carry out basic commands such as bell cut-off and trial evacuation, and can acknowledge defects and alarm conditions. | |||
| (view datasheet) | (view installation note) | (pdf) | |
 |
F100AM-3 | |
| Pertronic Industries' F100A LCD Mimic allows F100A Fire Alarm messages to be displayed remotely. Up to 8 addressable mimics may be connected to the F100A, which can carry out basic commands such as bell cut-off and trial evacuation, and can acknowledge defects and alarm conditions. | ||
| (view datasheet) | (pdf) | |
 |
F100AME | |
| Pertronic Industries' F100A Mimic Escutcheon Plate allows the F100A LCD Mimic to be flush-mounted in the wall cavity. | ||
| (view installation note) | (pdf) | |
 |
F100AMM-3 (4512:2003) F100AMMR-3 (4512:2003 + Alarm Reset) F100AMMRZ-3 (4512:2003 +Alarm Reset & Zone Select) F100AMM (4512:1997) |
|||
| Pertronic Industries' F100A LCD Mini Mimic allows F120A & F100A Fire Alarm messages to be displayed remotely. F100A LCD Mini Mimics may be connected in ‘slave mode’. In slave mode only the system messages are displayed but no command interaction is available, except for silencing the built-in buzzer. | ||||
| (view datasheet) | (view installation note) | (view manual) | (pdf) | |
 |
F100AMME | |
| Pertronic Industries' Mini Mimic Escutcheon Plate allows the F100A LCD Mini Mimic to be flush-mounted in the wall cavity. | ||
| (view installation note) | (pdf) | |
 |
 |
SLCABELFS, SLCABELRS 650h x 635w x 80d |
|
| Pertronic Industries' Slimline Mimic Cabinets come complete with index and support the Pertronic 12-Way Smart LED Display and additional 8-Way LED Displays. The mimics are compatible with the F120A, F100A and F16e Fire Alarm Panels. Optional BCO and Evacuate key switch's can be fitted. | |||
| (view datasheet) | (pdf) | ||
 |
 |
SLCABLPFS, SLCABLPRS 616h x 438w x 50d |
|
| Pertronic Industries' Slimline Mimic Cabinets come complete with index and support the Pertronic 12-Way Smart LED Display and additional 8-Way LED Displays. The mimics are compatible with the F120A, F100A and F16e Fire Alarm Panels. Optional BCO and Evacuate key switch's can be fitted. | |||
| (view datasheet) | (pdf) | ||
 |
 |
SLCABMPFS, SLCABLPMS 426h x 438w x 50d |
|
| Pertronic Industries' Slimline Mimic Cabinets come complete with index and support the Pertronic 12-Way Smart LED Display and additional 8-Way LED Displays. The mimics are compatible with the F120A, F100A and F16e Fire Alarm Panels. Optional BCO and Evacuate key switch's can be fitted. | |||
| (view datasheet) | (pdf) | ||
 |
F100PDB12, F100PDB | ||
| Pertronic Industries' LED Display Unit (LDU) is a fire alarm panel repeater or mimic that allows the status of Pertronic F120A, F100A & F16e fire alarm panels to be displayed remotely by 12-Way & 8 Way LEDs (Light Emitting Diodes). | |||
| (view datasheet) | (view installation note) | (pdf) | |
 |
L485LAC | |
| Pertronic Industries' RS485 LED Address Controller is used to remotely display global panel status. 8-Way LED Display boards can be connected to display zonal alarm status. | ||
| (view installation note) | (pdf) | |
 |
F100ZDRLY | ||
| Pertronic Industries' LED Display Relay Board is connected to the bus of a 12-way LED or Global LED display board. The LED Relay Board contains 8 non-latching relays that correspond to LED position numbers in the display. | |||
| (view datasheet) | (view installation note) | (pdf) | |
 |
48WOC-IF | |
| Pertronic Industries' 48-Way Open Collector Board is used with the F120A, F100A and F16e panel as a low cost solution for controlling large number of LEDs and / or Relays. | ||
| (view installation note) | (pdf) | |
